Ceramic Capillary Bonding Capillary Foar semiconductor ferpakking
Produkt applikaasje
Ceramic Capillary is in axisymmetrysk keramyske ark mei gatten yn 'e fertikale rjochting, dy't heart ta in krekte mikrostruktuer keramyske komponint.Wat tapassing oanbelanget, wurdt de Ceramic Capillary brûkt as in draadferbiningsynstrumint yn it proses foar draadferbining.WireBonding kin meitsje de metalen lead nau weld mei it substraat pad troch it brûken fan tinne metalen triedden (koper, goud, ensfh) en waarmte, druk, en ultrasone enerzjy, sa as te realisearjen de elektryske ferbining tusken chips en substraten en de ynformaasje útwikseling tusken chips.Geskikt foar bonding en ferpakking fan SCR, SAW, LED, diode, triode, IC-chip en oare circuits.
Produkt foardielen
OPT Cutting Tools Co., LTD.leit yn Shenzhen, Guangdong, Sina.It is in bedriuw dat produksje, ferkeap, ûndersyk en ûntwikkeling yntegreart.En kin ûndernimme it ûntwerp en fabrikaazje fan tekeningen, materialen en net-standert ark.Fêst oannimme ynlânske earste-line produksje materialen om te garandearjen de stabiliteit fan ferskate batches fan materialen.Kontrolearje it produksjeproses strikt om de kwaliteit fan ark te garandearjen.It bedriuw hat in soad technyske krêft, sterke produksjekapasiteit, wittenskiplik behear, mei as doel "oerlibjen troch kwaliteit, ûntwikkeling troch reputaasje", en hieltyd foarút sjitte om klanten bettere produkten te leverjen.
Akkurate levering, goede service
1. OPT Cutting Tools hat in eigen folsleine produksje, produksje en ferfier systeem.Op tiid levering.
2. Ien nei ien kommunikaasje en útwikseling kin wurde útfierd mei klanten om klanten better te foarsjen mei mear gaadlike en bettere keramyske bonding-ark
3. Oanpasse spesjale parameters neffens de spesjale easken fan klant;
Bonding Capillary Material upgrade
Oan 'e basis fan' e orizjinele aluminiumoxide, sirkoniumoxide, chromiumokside, ensfh.Ferminderje de wear en ferfanging tiden fan keramyske cleaver tip tidens wire welding.
Thin Wire Bonding Wedges Akkurate grutte
Us bedriuw nimt in folsleine set ymporteare produksjeapparatuer oan om alle karakteristike dimensjes te ferwurkjen.Hege presyzje ferwurkingsapparatuer en rike ferwurkingsûnderfining jouwe klanten produkten mei strikte grutte.
Hege presyzje, hege diminsjonele presyzje, minder ferwurkjen en glêd oerflak.
It produkt hat hege presyzje, hege dimensionale presyzje, minder machining bedrach en glêd oerflak.
De struktuer fan 'e keramyske kapillair is heul presys en kompleks, en har wichtige ôfmjittings hawwe in grutte ynfloed op it effekt fan draadbonding.OPT Cutting Tools kontrolearret strikt it produksjeproses om de kwaliteit fan ark te garandearjen.Om hege produkt krektens, hege diminsjonale krektens, minder Machtigingsformulier, en glêd oerflak te berikken.Us bedriuw set him yn foar de R&D en produksje fan middel- en heechweardige ynlânske keramyske bonding-ark op it mêd fan IC-ferpakking.Keramyske poeder en embryo dielen wurde folslein ûntwikkele en produsearre ûnôfhinklik.
BPP: 150 μm (μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Θ | CA |
| A-1 | 38/1.5 | 51/2.0 | 229/9.0 | 102/4.0 | 38/1.5 | 8° | 30° | 120° |
| A-2 | 38/1.5 | 51/2.0 | 152/6.0 | 66/2.6 | 10/0.4 | 0° | 30° | 90° |
| A-3 | 38/1.5 | 51/2.0 | 229/9.0 | 86/3.4 | 102/4.0 | 0° | 30° | 90° |
| A-4 | 38/1.5 | 51/2.0 | 203/8.0 | 86/3.4 | 61/2.4 | 0° | 30° | 90′ |
| A-5 | 38/1.5 | 56/2.2 | 239/9.4 | 102/4.0 | 38/1.5 | 8° | 30° | 120° |
| A-6 | 38/1.5 | 56/2.2 | 229/9.0 | 96/3.8 | 102/4.0 | 0° | 30° | 90° |
| A-7 | 38/1.5 | 56/2.2 | 203/8.0 | 86/3.4 | 61/2.4 | 0° | 30° | 90° |
| A-8 | 38/1.5 | 64/2.5 | 239/9.4 | 102/4.0 | 38/1.5 | 6° | 30° | 120° |
| A-9 | 38/1.5 | 64/2.5 | 203/8.0 | 89/3.5 | 61/2.4 | 0° | 30° | 90° |
| A-10 | 51/2.0 | 64/2.5 | 191/7.5 | 81/3.2 | B/0,3 | 0° | 30° | 90° |
| A-11 | 51/2.0 | 64/2.5 | 292/11.5 | 102/4.0 | 127/5.0 | 0° | 30° | 90° |
| A-12 | 51/2.0 | 76/3.0 | 356/14.0 | 122/4.8 | 152/6.0 | 0° | 30° | 90° |
| A-13 | 51/2.0 | 89/3.5 | 419/16.5 | 135/5.3 | 178/7.0 | 0° | 30° | 90° |
| A-14 | 51.64/2.0.2.5 | 76/3.0 | 330/13.0 | 140/5.5 | 64/2.5 | 8° | 30° | 120° |
| A-15 | 64.76/2.5.3.0 | 89/3.5 | 330/13.0 | 127/5.0 | 64/2.5 | 8° | 30° | 120° |
| A-16 | 64.76/2.5.3.0 | 102/4.0 | 330/13.0 | 140/5.5 | 64/2.5 | 8° | 30° | 120° |
| A-17 | 76/3.0 | 102/4.0 | 483/19.0 | 168/6.6 | 203/8.0 | 0° | 30° | 90° |
BPP: 140 μm (μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Θ | CA |
| B-1 | 22/0.9 | 33/1.3 | 140/5.5 | 64/2.5 | 20/0.8 | 8° | 30° | 120° |
| B-2 | 25/1.0 | 38/1.5 | 165/6.5 | 74/2.9 | 25/1.0 | 8° | 30° | 120° |
| B-3 | 25/1.0 | 38/1.5 | 89/3.5 | 53/2.1 | B/0,3 | 0° | 30° | 90° |
| B-4 | 25/1.0 | 38/1.5 | 114/4.5 | 53/2.1 | 8/0,3 | 0° | 30° | 90° |
| B-5 | 25/1.0 | 38/1.5 | 178/7.0 | 64/2.5 | 76/3.0 | 0° | 30° | 90° |
| B-6 | 25/1.0 | 38/1.5 | 203/8.0 | 53/2.1 | 89/3.5 | 0° | 30° | 90° |
| B-7 | 25/1.0 | 43/1.7 | 165/6.5 | 74/2.9 | 25/1.0 | 8° | 30° | 120° |
| B-8 | 25/1.0 | 43/1.7 | 203/8.0 | 53/2.1 | 89/3.5 | 0° | 30° | 90° |
| B-9 | 25.30/1.0.1.2 | 43/1.7 | 229/9.0 | 74/2.9 | 30/1.2 | 8° | 30° | 120° |
| B-10 | 25.30/1.0.1.2 | 43/1.7 | 152/6.0 | 59/2.3 | B/0,3 | 8° | 30° | 120° |
| B-11 | 25.30/1.0.1.2 | 43/1.7 | 203/8.0 | 74/2.9 | 89/3.5 | 0° | 30° | 90° |
| B-12 | 25.30/1.0.1.2 | 46/1.8 | 229/9.0 | 74/2.9 | 38/1.5 | 8° | 30° | 120° |
| B-13 | 30/1.2 | 46/1.8 | 203/8.0 | 76/3.0 | 89/3.5 | 0° | 30° | 90° |
BPP: 100 μm(μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Θ | CA |
| C-1 | 25/1.0 | 38/1.5 | 130/5.1 | 53/2.1 | 30/1.2 | 11 | 30° | 90° |
| C-2 | 30/1.2 | 38/1.5 | 130/5.1 | 56/2.2 | 30/1.2 | 11 | 30° | 90° |
| C-3 | 30/1.2 | 38/1.5 | 130/5.1 | 56/2.2 | 30/1.2 | 8′ | 30° | 90° |
| C-4 | 30/1.2 | 38/1.5 | 130/5.1 | 56/2.2 | 30/1.2 | 4′ | 30° | 90° |
| C-5 | 30/1.2 | 41/1.6 | 130/5.1 | 59/2.3 | 30/1.2 | 11 | 30° | 90° |
BPP: 90 μm(μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Θ | CA |
| D-1 | 25/1.0 | 33/1.3 | 109/4.3 | 51/2.0 | 13/0.5 | 11° | 30° | 90° |
| D-2 | 25/1.0 | 33/1.3 | 109/4.3 | 51/2.0 | 13/0.5 | 8° | 30° | 90° |
| D-3 | 25/1.0 | 33/1.3 | 109/4.3 | 51/2.0 | 13/0.5 | 4° | 30° | 90° |
| D-4 | 25/1.0 | 35/1.4 | 109/4.3 | 51/2.0 | 20/0.8 | 11° | 30° | 90° |
| D-5 | 30/1.2 | 38/1.5 | 109/4.3 | 51/2.0 | 20/0.8 | 11° | 30° | 90° |
| D-6 | 30/1.2 | 38/1.5 | 109/4.3 | 53/2.1 | 1310,5 | 8° | 30° | 90° |
| D-7 | 30/1.2 | 38/1.5 | 109/4.3 | 53/2.1 | 13/0.5 | 4° | 30° | 90° |
BPP: 80 μm(μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Θ | CA |
| E-1 | 25/1.0 | 33/1.3 | 99/3.9 | 48/1.9 | 13/0.5 | 4° | 30° | 90° |
| E-2 | 25/1.0 | 33/1.3 | 99/3.9 | 4B/1.9 | 13/0.5 | 8° | 30° | 90° |
| E-3 | 25/1.0 | 33/1.3 | 99/3.9 | 48/1.9 | 13/0.5 | 11° | 30° | 90° |
| E-4 | 25/1.0 | 35/1.4 | 99/3.9 | 46/1.8 | 13/0.5 | 11° | 30° | 90° |
| E-5 | 30/1.2 | 38/1.5 | 99/3.9 | 51/2.0 | 13/0.5 | 4° | 30° | 90° |
| E-6 | 30/1.2 | 3B/1.5 | 99/3.9 | 51/2.0 | 13/0.5 | 8° | 30° | 90° |
BPP: 70 μm(μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Φ | CA |
| F-1 | 25/1.0 | 30/1.2 | 91/3.6 | 43/1.7 | 10/0.4 | 8° | 30° | 90° |
| F-2 | 25/1.0 | 30/1.2 | 91/3.6 | 43/1.7 | 10/0.4 | 4° | 30′ | 90° |
| F-3 | 25/1.0 | 33/1.3 | 91/3.6 | 43/1.7 | 13/0.5 | 11° | 30′ | 90° |
BPP: 60 μm(μm/mil)
| Part NO. | WD | H | T | CD | OR | α | Φ | CA |
| G-1 | 23/0.9 | 28/1.1 | 81/3.2 | 35/1.4 | 13/0.5 | 11° | 30° | 90° |
| G-2 | 25/1.0 | 30/1.2 | 81/3.2 | 35/1.4 | 13/0.5 | 11° | 30° | 90° |