End molens ferwurkje RVS en waarmte-resistant alloys-T503
Foardielen
De drill is makke fan ymportearre hurde alloy materiaal, dat kin ferwurkje materialen mei hurdens <60.It is sawat 20 kear langer dan de hege snelheid stielen drill bit en sawat 5 kear effisjinter
Ferwurkjen saak
Workpiece materiaal hurdens HRC25 ~ 38
Wurk materiaal: SUS
diafragma: D10
oanrikkemandearre parameter: Vc=150m/min fr=0.3mm/r
cutting libben: 300MIN
Produkt foardielen
Hege hurde stiel is in relatyf lestich materiaal om te ferwurkjen, HRC is normaal boppe 50 graden, guon hawwe mear as 60 graden, om in goede coating en materiaal te kiezen, de sterkte fan 'e tool tip te kontrolearjen, om de tooll better te beskermjen.
It ûntwerp fan spiraalgroef is heul wichtich, wy moatte soargje foar de sterkte fan 'e snijflak, in goede baan dwaan fan' e coating, ferminderje de snijkrêft en wearze, soargje foar de krektens fan 'e ferwurking!
Neffens de behoeften fan klanten kin it ek makke wurde yn 2 - edge 4 - edge of 6 - edge struktuer, goede prestaasjes fan izeren filings, sterke stabiliteit
End milling cutter wurket hege hurdens stiel
| Oantsjutting | D | d | H | L | Z | Fig. |
| HE-Z-D1.0S | 1.0 | 4 | 3 | 50 | 2/4 | A |
| HE-Z-D1.5S | 1.5 | 4 | 4 | 50 | 2/4 | A |
| HE-Z-D2.0S | 2.0 | 4 | 6 | 50 | 2/4 | A |
| HE-Z-D2.5S | 2.5 | 4 | 8 | 50 | 2/4 | A |
| HE-Z-D3.0S | 3.0 | 4 | 8 | 50 | 2/4 | A |
| HE-Z-D4.0S | 4.0 | 4 | 11 | 50 | 2/4 | B |
| HE-Z-D1.0 | 1.0 | 6 | 3 | 50 | 2/4 | A |
| HE-Z-D1.5 | 1.5 | 6 | 4 | 50 | 2/4 | A |
| HE-Z-D2.0 | 2.0 | 6 | 6 | 50 | 2/4 | A |
| HE-Z-D2.5 | 2.5 | 6 | 8 | 50 | 2/4 | A |
| HE-Z-D3.0 | 3.0 | 6 | 8 | 50 | 2/4 | A |
| HE-Z-D3.5 | 3.5 | 6 | 10 | 50 | 2/4 | A |
| HE-Z-D4.0 | 4.0 | 6 | 11 | 50 | 2/4 | A |
| HE-Z-D4.5 | 4.5 | 6 | 11 | 50 | 2/4 | A |
| HE-Z-D5.0 | 5.0 | 6 | 13 | 50 | 2/4 | A |
| HE-Z-D5.5 | 5.5 | 6 | 16 | 50 | 2/4 | A |
| HE-Z-D6.0 | 6.0 | 6 | 16 | 50 | 2/4/6 | B |
| HE-Z-D8.0 | 8.0 | 8 | 20 | 60 | 2/4/6 | B |
| HE-Z-D9.0 | 9.0 | 10 | 22 | 75 | 2/4/6 | A |
| HE-Z-D10 | 10.0 | 10 | 25 | 75 | 2/4/6 | B |
| HE-Z-D12 | 12.0 | 12 | 30 | 75 | 2/4/6 | B |
| HE-Z-D14 | 14.0 | 14 | 32 | 75 | 2/4/6 | B |
| HE-Z-D16 | 16.0 | 16 | 45 | 100 | 2/4/6 | B |
| HE-Z-D18 | 18.0 | 18 | 45 | 100 | 2/4/6 | B |
| HE-Z-D20 | 20.0 | 20 | 45 | 100 | 2/4/6 | B |
Universele einmole foar stiel getten izer
| Oantsjutting | D | d | H | L | Z | Fig. |
| HE-ZL-D3.0 | 3.0 | 6 | 12 | 75 | 2/4 | A |
| HE-ZL-D4 | 4 | 6 | 15 | 75 | 2/4 | A |
| HE-ZL-D5 | 5 | 6 | 20 | 75 | 2/4 | A |
| HE-ZL-D6 | 6 | 6 | 20 | 75 | 2/4/6 | B |
| HE-ZL-D8 | 8 | 8 | 25 | 100 | 2/4/6 | B |
| HE-ZL-D10 | 10 | 10 | 30 | 100 | 2/4/6 | B |
| HE-ZL-D12 | 12 | 12 | 35 | 100 | 2/4/6 | B |
| HE-ZL-D14 | 14 | 14 | 40 | 100 | 2/4/6 | B |
| HE-ZL-D16 | 16 | 16 | 50 | 150 | 2/4/6 | B |
| HE-ZL-D20 | 20 | 20 | 55 | 150 | 2/4/6 | B |
